About Us

Range Road Enterprises is a small family run Canadian company that started out when two guys with bad backs thought there must be a better, affordable way to cut and split wood, in 2011 we were selling Log Splitters and started looking at ideas on how to make them better.  This led us to developing our first basic processor, we started working with a Chinese factory and our first model - The RR1000 was born, a 6HP, 6 Ton Firewood Processor that worked extremely well, all of these units are still out there working great.
The RR1000 went through a few changes and ended up as a 9HP 6 Ton unit and because this is Canada and bigger is better we developed a new unit, the RR2000 that would handle 16” logs and had a conveyor, with input from our customers we made a few changes to the body and conveyor and we had the RR2500.
At this time we made the decision that to look after our customers properly we needed to have local dealers that people could go to for demo’s, purchasing, support and replacement parts.
In 2015 we added the RR20T 20 Ton Processor, the 5M Standalone Conveyor, the RR7TE 7 Ton Kinetic Splitter, the RR600 Atv/UTV Dump Trailer to our lineup and in Spring and summer of 2016 we expanded our lineup again with the RR27 T 27 Ton Processor, the RR10T & RR10T36 7 Ton Processors, The RR120 & RR270 Hydraulic Log Splitters, the RR400 Wood Chipper and a few more models of ATV/Utv Trailers.

2011 - Range Road started out selling Log Splitters in central Alberta

RR365
RR365
RR365

2012 -our first firewood processor RR1000 6HP, 6 Ton ram, notice the clutch lever to engage the saw

RR1000
RR1000

2013 -The RR1000 9HP, 6 Ton ram, we had figured out a better way to engage the saw now.

RR1000
RR1000

2013 - The RR2000, 16” max diameter, 10 Ton 13HP engine, 4” wide conveyor belt, with this processor we knew we had something good.

RR2000
RR2000

2014 - The RR2500, customer input helped make a few changes to the RR2000, the biggest change was to the conveyor, 6” belt and added sides

RR2500
RR2500

2014 -  The 5M Standalone conveyor was introduced, a 5 meter light duty conveyor with a 6” belt.

RR500
RR500

2014 -  The infeed conveyor with a 6” belt and using parts that interchange with the rear conveyor was developed and added to the lineup, it will retrofit to all RR2000/RR2500/RR20T units with no welding.

RR2501
RR2501

2015 - The RR20T was introduced, 16” max. Diameter, 20 Ton, 14HP, customer input helped with many small changes and body modifications.

RR20T
RR20T

2015 - The RR7TE was introduced, a 7 Ton Kinetic, Electric Log Splitter with a 2 second cycle time

RR7E
RR7E

2015 - The RR600 ATV/UTV Dump/Logging Trailer was introduced, heavily built with galvanized and powder coated components.

RR600
RR600

2015 -  Range Road became a Jonsered Dealer and opened the retail store at the Eckville Location.

Store
Store

2016 - In 2016 we added the RR10T and RR10T36 entry Level Firewood Processors as well as the RR120 12 Ton and RR270 27 Ton Hydraulic Log Splitter with cycle times of 4 and 6 seconds which are the fastest in the market, we have our new 27 Ton Firewood Processor and have added a couple more Atv/Utv Trailers to the lineup.

 
RR10T 4
RR270
RR120
RR27T

2017  – we added the RR27PTO Firewood Processor, RR400 Series & RR390 wood chippers, walk behind stump grinders and trenchers, suitcase generators & pressure washers, Log lifters, Log Tables and Log arches

RR27PTO
RR400

 2018  – we hit the 1000 mark for sales of our RR20T Firewood Processor.

We added the RR415 & RR420 PTO wood chippers and we started warehousing some of our products in the USA.

RR415.1
RR420.1