RR415 6″ PTO Wood Chipper

RR415

Range Road introduces our new RR415 6" PTO Wood Chipper, ideal for tractors ranging from 20 to 50 HP

The extremely durable PTO drive wood chipper was designed to work in tandem with 20 to 50 HP tractors and make efficient work of converting branches and brush piles into wood chips. The RR415 wood chipper features an auto hydraulic infeed system, direct drive, a 6″ x 8″ (15 cm x 20 cm) opening and 360 degree rotating discharge chute.

The RR415 was designed to offer acreage owners an economical and well engineered wood chipper. This is a serious wood chipper, with a huge 6” (15 cm) chipping capacity. It was built to be the best valued wood chipper in its class.

It utilizes a large 23” x 27” (58cm x 69cm) infeed hopper opening that tapers down to a 6” x 8” (15 cm x 20 cm) opening where the 8.25” (21cm) diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼”(6mm) diameter and as large as 6” (15 cm) diameter can be fed through the RR415. To chip full 6” (15cm) diameter logs at full infeed speed, tractors with over 40 HP at the PTO is required.

Hydraulic Infeed System

Branches are pulled into the RR415 via the large 8.25” (21cm) diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.

RR415 6" Pto Wood Chipper
$2899.50
Auto hydraulic infeed system and 6" x 8" (15cm x 20cm) opening. Ideal for tractors ranging from 20 to 50 HP.
Crated Unit

RR415 Flywheel

 

Flywheel

The RR415 has a dynamically balanced 24” (61cm) diameter, 3/4” (2cm) thick, and 100 lb / 45 kg solid steel flywheel that runs on a 2” (5cm) diameter shaft and is supported by 2 industrial and greaseable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 540 RPM.

 

Chipper Blades

The RR415 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts. Changing blades can be done very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.

RR415 Blade

rr415

 

Folding Infeed Chute

The infeed chute on the RR415 wood chipper has a large 23” x 27” (58 cm x 69 cm) opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.

 

Infeed Opening

The opening in the flywheel housing is a large 6” x 8” (15cm x 20cm) square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before feeding them into the chipper.

RR415

RR415.2 

 

Discharge Chute

The RR415 discharge chute was designed to rotate 360 degrees by simply loosening the eye bolt and spinning it by hand to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 66” (1.7m) off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.

 PTO Shaft

Included with the RR415 chipper is the PTO shaft complete with a shear pin.

Pto Shaft

Assembly

The RR415 chipper will arrive in a steel crate and can be up and running in as little as one hour. The infeed chute and discharge chute have been removed during shipping to eliminate the possibility of damage. The chipper will require 20L (5 gallons) of AW32 hydraulic oil in the tank which (not included). Lastly, attach the PTO shaft that comes included and trim it to length for your tractor as if required.

Weight

The RR415 was designed for property owners, but built like a commercial wood chipper. It weighs in at 710 lbs (320kgs).

Warranty

The RR415 is covered by a full 2 year warranty against any manufacturing defects.  Wearing parts such as belts, bearings and blades are not covered under our warranty.

Range Road RR415 Pto Wood Chipper